Concrete Removal Torquay | Torquay Creative Concrete

Need Concrete Removal Torquay locals can rely on—done safely, cleanly, and with minimal fuss? You’re in the right place. Torquay Creative Concrete is your friendly, experienced crew for breaking up and removing old driveways, paths, patios, slabs and footings across Torquay and the Surf Coast. We handle the lot—from tidy saw-cutting and demolition to responsible disposal and site preparation—so you can move straight on to the next stage of your project.

Whether you’re renovating the front, reclaiming the backyard, or clearing an old slab for an extension, our team brings the right tools, the right plan, and a down-to-earth approach. We’re locals, we’re practical, and we treat your place like our own: careful, respectful, and organised.

 

Why choose us for Concrete Removal in Torquay?

1) Local know-how
Torquay blocks have quirks—coastal soils, tight side access, shared driveways, and plenty of landscaping to protect. We tailor our removal approach to your site and your neighbours, not a one-size-fits-all template.

2) Clean cuts, tidy edges
Before we break up anything, we saw-cut neat lines to separate the concrete we’re removing from the bits you’re keeping. That means straighter borders, less damage, and a better starting point for whatever’s going in next.

3) Right equipment for the job
From compact breakers and skid steers to tipper trucks and tight-access gear, we bring the tools that make removal efficient without turning your garden into a worksite obstacle course.

4) Safety-first mindset
Underground services, rebar, mesh, trip hazards—we look before we leap. We plan access, cordon off work areas, and work methodically so everyone stays safe and the job runs smoothly.

5) Responsible disposal
Where possible, we recycle concrete and clean fill through the appropriate channels. We also keep load contamination to a minimum—separating green waste, soil, and rubble—so materials can be processed properly.

6) Start-to-finish service
We can handle everything from breakup and removal to site preparation for your next pour: trimming levels, compacting base, and leaving the area ready for new concrete, decking or turf.

 

What we remove (and how we do it)

Driveways & Crossovers

Old driveway cracked, sunken, or simply not your style? We’ll saw-cut clean terminations at the garage slab and footpath, break up the panels in manageable sections, and load out via tipper. If you’re replacing like-for-like, we can also prep the new base and set out levels to suit your fall and drainage.

Paths & Side Access

Side paths often sit over utility corridors or close to fences. We use compact breakers and hand tools where needed to protect services, posts and garden beds. If you’re keeping part of the path, we’ll make crisp saw-cuts so the transition looks intentional.

Patios, Alfresco & Outdoor Areas

From textured patios to honed or exposed aggregate, we take care to avoid chipping adjoining tiles, bricks and door thresholds. We can remove the slab, scrape back tired bedding, and prepare a fresh base for your next surface.

House Slabs, Garage Slabs & Footings

Demolishing an outbuilding or replacing a small structure? We expose edges, cut reinforcement cleanly, break the slab into liftable sections and remove footings with appropriate equipment. Where access is tight, we use smaller machinery or staged removal to keep things controlled.

Steps, Landings & Retaining Edges

These areas can be tied into walls or masonry. We make exploratory cuts, confirm where reinforcement runs, and dismantle in a sequence that protects the surrounding structure.

Garden Features & Random Pours

Bin pads, old shed pads, DIY strips—if it’s concrete, we can sort it. We’ll remove the lot and leave the area raked, compacted and ready for landscaping or new works.

 

Our process: simple, transparent, and efficient

1. Site visit & plan
   Tell us what you want gone and what stays. We’ll check access, slopes, drainage, services, and any delicate areas (garden edges, timber decks, rendered walls). Then we map out a safe, tidy sequence for removal.

2. Preparation
   We mark up saw-cuts and boundaries, protect nearby surfaces, and set up access boards where needed. If required, we’ll ask you to confirm service locations before work begins.

3. Saw-cutting
   Clean, straight cuts make all the difference. They prevent tear-outs, protect adjoining concrete, and set you up for a crisp finish on the edge you’re keeping.

4. Break-up
   We use the right method for the thickness and reinforcement—breaker, skid steer, or hand tools—lifting in controlled pieces to avoid shocks to nearby structures.

5. Load-out & disposal
   Material is loaded straight to the truck or bins to keep the site tidy. We separate concrete from general rubble where practical to support recycling.

6. Final tidy & base prep (optional)
   We can scrape down to levels, bring in crushed rock, and compact a new base so you’re ready for the next stage—new concrete, paving, decking, or turf.

7. Handover
   We run through the completed works, confirm access is reinstated, and share practical tips for whatever’s coming next.

 

Tight access? No worries.

Many Torquay properties have narrow side gates, established gardens or limited street parking. We’re used to tight-access concrete removal. With compact machinery, protective matting and a bit of planning, we can move material without making a mess of your lawn or beds. And when machinery won’t do, old-fashioned hand-demolition and barrows still get it done—carefully and efficiently.

 

Working around services and structures

Old slabs can hide surprises—stormwater, irrigation, electrical conduits or telecoms. We encourage clients to share any plans or previous work information they have. On site, we start cautiously, make exploratory cuts, and avoid deep bites until we’re confident of what’s beneath. If we find reinforcement tied into a wall or footing, we stage the removal to protect the structure you’re keeping.

 

Concrete recycling & responsible disposal

We try to keep concrete loads clean so they can be recycled into road base or drainage aggregate by approved facilities. Soil and green waste are kept separate where possible, minimising contamination and tipping impacts. It’s better for the environment and keeps your project tidier from start to finish.

 

When does concrete need removing (instead of patching)?

• Significant cracking or heaving: When movement has changed levels and falls, patching rarely solves the underlying issue.

• Poor drainage/falls: Water running towards the house or ponding in the middle? A replacement with corrected levels is often the right fix.

• Subgrade failure: If the base was never compacted properly, you’ll keep chasing dips and trip points.

• Major rusting of reinforcement: Rust expands and spalls the concrete. Removing affected sections and rebuilding prevents further deterioration.

• Design change: Renovation, pool install, or new landscaping plan—sometimes the old footprint just doesn’t fit the new life of the space.

If you’re unsure, we’re happy to assess and give you a practical path forward.

 

Add-on services to keep your project moving

• Base trimming & compaction for new concrete, paving or decking

• Supply and spread of crushed rock to finished levels

• Temporary access paths during works

• Coordination with other trades (fencers, landscapers, builders)

• New concrete: driveways, paths, and slabs installed by the same team once removal is complete

One crew from demolition to new pour makes timelines simpler and keeps accountability in one place.

 

What to do before we arrive (a quick checklist)

• Clear the area: Move cars from the driveway, relocate bins and outdoor furniture, and pick up toys or garden hoses.

• Pets & kids: Arrange a safe spot away from the work area for the day.

• Access: Let us know about gate widths, steep driveways, or shared access so we can bring the right gear.

• Heads-up to neighbours: If you share a driveway or parking, a quick note helps everyone plan.

 

What affects the scope and timeline?

Every removal is a little different. Factors include:

• Thickness of the slab and whether it’s reinforced (mesh or rebar)

• Access for machinery and trucks (tight sites take longer)

• Proximity to structures like walls, fences, services and trees

• Amount of saw-cutting required for clean separations

• Total volume of concrete and whether materials can be recycled separately

• Weather—we work year-round, but heavy rain or extreme winds may change the day’s plan

We’ll talk through these at the start so expectations match reality.

 

FAQs: Concrete Removal Torquay

Will removal damage my garden or lawn?
We use protective mats, boards and careful paths for machinery. Some flattening is normal where access is tight, but we plan routes to minimise impact and tidy up afterwards.

Is it noisy and dusty?
Concrete demolition involves noise and some dust. We use saws with water suppression and work in stages to keep dust down. Giving the area a light hose afterwards helps too.

What happens to the rubble?
We load out as we go. Clean concrete is taken to the appropriate facility for recycling, where possible; mixed waste is handled separately.

Can you take just part of a slab or driveway?
Absolutely. We saw-cut clean lines and remove only what you want gone, leaving a neat edge ready for the next finish.

Do you locate services?
We’ll ask about known services and encourage a check before we start. On the day, we work cautiously and adjust the plan if we uncover anything unexpected.

How long does it take?
Small areas can be completed in a day; larger, reinforced slabs or tricky access can take longer. We’ll outline an estimated schedule once we’ve seen the site.

Can you prepare for the new surface straight away?
Yes. We can trim to depth, bring in crushed rock, compact and leave the base ready for your next step—or proceed with a new pour if you’d like one team to handle everything.

What about mesh and rebar?
We cut reinforcement cleanly and remove it with the concrete. If it’s tied into a footing you’re keeping, we stage the removal to protect the structure.

Do you work on small jobs?
From a bin pad to a full driveway, we’re happy to help. If it matters to you, it matters to us.

 

How we keep things tidy from start to finish

• Neat staging: Tools and materials set up out of the way of doors and gates

• Daily clean-downs: Blow/vac loose debris and sweep paths before we leave

• Clear communication: You’ll know when access is open again and what’s next

• Respect for shared spaces: We keep verges and footpaths neat and safe during works

 

Pair your removal with a fresh start.

Once the old concrete is gone, you’ve got a blank canvas. If you’re planning a new exposed aggregate driveway, coloured paths, or a crisp alfresco slab, we can carry the job right through—levels, forms, reinforcement, pour and finish—with the same attention to detail you saw during removal. One call, one crew, clean lines from start to finish.

 

Areas we service

We’re based on the Surf Coast and regularly work in Torquay, Jan Juc, Mount Duneed, Armstrong Creek, Charlemont, Anglesea, Waurn Ponds, and across Greater Geelong. If you’re nearby and unsure, just ask—we’re happy to confirm.

 

Ready to clear the way?

If you’re searching for Concrete Removal Torquay that’s straightforward, careful and well organised, Torquay Creative Concrete is ready to help. We’ll assess the site, plan a safe removal, and leave you with a clean, prepared space that’s ready for what’s next.

Book a friendly site check.

Send us a couple of photos and your address, and we’ll organise a quick visit. We’ll talk through options and map out a simple plan that fits your timeline.

Want us to handle the next stage too?

No problem. From removal to fresh concrete—driveways, paths, or slabs—we can coordinate the full job so you don’t have to juggle multiple crews.

 

Quick recap (for the skimmers)

• Focused keyword: Concrete Removal Torquay

• What we do: Saw-cutting, concrete break-up, load-out, recycling-minded disposal, base trimming and compaction, prep for new works

• Where we do it: Torquay and the surrounding Surf Coast/Geelong suburbs

• Why it helps: Safer sites, better drainage, clean edges and levels ready for new concrete, paving or landscaping

• How we work: Careful planning, the right gear, tidy execution, respectful of neighbours and gardens

 

Clear the old and make space for something better. Choose Torquay Creative Concrete for Concrete Removal Torquay that’s neat, safe and stress-free—from first cut to final clean-up.